SAFETY ANCHOR FOR METAL ROOFS
Attached files
Open or select files to share.
Description
- Solid cast aluminum anchor
- For use on steel standing seam panels (24 and 22) gauge only
- Causes no damage to the standing seam
Specific applications
WARNING: In Canada, you must always install the anchor with the specifications and sealed details of an engineer. The specifications below are for information purposes only.
Personal fall protection arrest: Universal Safety Anchor (USA) may be used as a personal fall arrest system to support a maximum of one worker with a max loaded weight of 310 lbs. The mounting location on the standing seam must be determined to be structurally capable of withstanding a fall arrest impact on the Universal safety Anchor (USA). Maximum allowable free fall is 6ft. (1.8 m) when using the supplied D-Ring. Maximum allowable roof pitch in fall arrest is 12/12.
Restraint: Universal Safety Anchor (USA) may be used as a worker restraint device with a 1,000 lbs. impact load on the attachment point. No free fall allowed. Roof pitch is limited to 4/12 maximum.
COMPLIANT WITH OSHA 1910.140
Contact us to obtain the test results
of ANSI Z359.18-2017 and get a detailed
analysis of the anchor performance.